MATERIAL SAFETY DATA SHEET

1. Product Identification:
Product Name:	Peppermint Oil
Botanical Name:	Mentha arvensis
Synonyms:	M. arvensis var. piperascens, Mentha austriaca, Mentha arvensis L.
INCI Name:	Mentha arvensis leaf oil
CAS #:	68917-18-0
County of Origin:	India.
2. Classification:
Chemical Identification: Oil, cornmint FEMA No:  2848         CAS NO:  8006-90-4   UN No:  3082 Pkg Group III EMERGENCY TELEPHONE NUMBER: (703) 339-5388
3. Hazardous Ingredients Information:
Menthol. Health: Avoid in case of heart disease, fever and epilepsy. Hazard symbol: Xi N            R phase:37/38, 41, 43, 51/83
4. Physical & Chemical Properties:
Appearance:	Colorless to pale yellow liquid.
Odor:	Characteristic menthol–like odor.
Solubility:	Soluble in alcohol and oils. Insoluble in water.
Specific Gravity:	0.888 – 0.910 @ 20°C
Optical Rotation:	-24 – -15 @ 20°C
Refractive Index:	1.4560 – 1.4660 @ 20°C
Total Menthol:	40 – 75 %
L-Menthone:	30 – 45 %
Isomenthone:	5 – 20 %
Extraction Method:	Steam distillation of the herb.
Contents:	Menthol, menthone, menthyl acetate, limonene, neomenthol, isomenthone and traces of  1,8-cineol, piperitone, camphene, linalool, β-caryophyllene, β-caryophyllene epoxide, pulegone, α-pinene, β-pinene, germacrene D, menthofurane, and β-hexenyl phenylacetate.
Flash Point:	66°C
5. Fire/Explosion Hazard:
Flash Point:  66°C  Combustible liquid. Will ignite if moderately heated.
6. Reactivity/Stability Data:
Reactivity: Stable. Avoid contact with strong oxidizers, phenol, chloral hydrate, betanaphthol and resorcinol or thymol titrations.
Decomposition: When heated to decomposition produces acrid fumes and carbon monoxide smoke.
7. Toxicological Properties/Information:
Oral (rat), LD50 = 2426 mg/kg   Skin (rabbit), LD50 >5 g/kg Slightly hazardous to the skin (irritant), eyes and respiratory tract. May also cause allergic dermatitis. In case of eye contact, may cause loss of corneal epithelium, corneal infiltration, and release of pigment into anterior chamber with deposits on back of cornea. Possible mutagen.
8. Preventive Data:
Spillage: Absorb spills, cover with an inert, non-combustible, inorganic absorbent material, and remove to an approved disposal container.
Fire: Recommended extinguishing media – CO2, foam and dry chemicals. DO NOT use direct water jet on burning material.
Environment: Keep away from drains, surface and ground water.
Storage: Store in cool, dry and well ventilated area protected in tightly closed container away from sources of ignition, heat and sunlight. Keep air contact to minimum. Note: This product is sensitive to light.
9. First Aid Measures:
Eye contact: Flush with water for at least 15 minutes. Call physician if irritation persists.
Inhalation: Remove to fresh air. Avoid casual breathing.
Ingestion: Rinse mouth and consult a physician immediately. Never-give anything by mouth if victim is unconscious, is rapidly-losing consciousness, or is convulsing.
Skin contact: Remove contaminated clothing. Wash with soap and plenty of water.
11. Individual Protection for Industrial and Bulk Use:
Use safety glasses. Avoid breathing in product by ensuring good ventilation when handling. Avoid skin contact by using chemical resistant gloves.
12. Preparation Information:
Quality Assurance WFMED 8245 Backlick Road Unit D and V Lorton VA 22079 Phone: (703) 339-5388 Fax: (703) 339-1999 Revision Date: July 23, 2012.
Disclaimer The information contained in this Certificate of Analysis and Material Safety Data Sheet is obtained from current and reliable sources. The information contained herein is true and to the best of WFMED knowledge. Nothing herein should be interpreted as a recommendation to infringe existing patents or violate any laws or regulation. Final determination of the suitability of the material is the sole responsibility of the user. Customers should purchase products from WFMED with the clear understanding that all products must be used at the customers own discretion and only after referencing Material Safety Data Sheets (MSDS) and all other relevant technical information specific to the product. WFMED shall not be held responsible for any damages to property or for any adverse physical effects (including injury or bodily harm) caused by insufficient knowledge or the improper use of a product. The user of the product is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property rights of third parties. As with any manufacturing process, WFMED strongly recommends small lab scale testing for evaluation purposes prior to full commercial manufacturing. The information on the WFMED website is obtained from current and reliable sources but makes no representation as to its comprehensiveness or accuracy. Nothing contained herein should be considered as a recommendation by WFMED as to the fitness for any use. As the ordinary or otherwise use(s) of this product is outside the control of WFMED, no representation or warranty, expressed or implied is made as to the effect(s) of such use(s) (including damage or injury), or the results obtained. The liability of WFMED is limited to the value of the goods and does not include any consequential loss. WFMED shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon. Please note, the International Federation of Aromatherapists do not recommend that Essential Oils be taken internally unless under the supervision of a Medical Doctor who is also qualified in clinical Aromatherapy.  In addition, Essential Oils must be properly diluted before use in order to avoid any damages to property or adverse physical effects (including injury or bodily harm).